{"title":"Pressure Barrels \u0026 Spares","description":"","products":[{"product_id":"king-keg-barrel-top-tap-s30-valve","title":"King Keg Top Tap - S30 Valve - Pressure Barrel","description":"\u003ch2\u003eKing Keg Top Tap — 25 Litre Pressure Barrel with S30 Valve Cap\u003c\/h2\u003e\n\u003cp\u003eThe King Keg Top Tap is a 25-litre homebrew pressure barrel with a top-mounted tap and a beer float that draws from near the surface of the liquid, delivering clearer beer to the glass by avoiding sediment settled at the bottom. The 4\" cap is fitted with a brass S30 dual valve (gas inlet and pressure relief) for use with an S30 CO2 cylinder. The wider neck makes cleaning straightforward between batches. Handles are included for easy lifting and moving.\u003c\/p\u003e\n\u003cp\u003eIf S30 refills are not readily available locally, the \u003ca href=\"\/products\/sodastream-adapter-s30\"\u003eSodaStream to S30 Valve Adapter\u003c\/a\u003e allows use of standard SodaStream CO2 cylinders. For an upgraded dispensing experience, the \u003ca href=\"\/products\/barrel-tap-sparkler-style\"\u003eSparkler Tap\u003c\/a\u003e is a compatible replacement tap with adjustable head control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Ensure the tap is fitted correctly before filling. Testing with water and CO2 before use is strongly recommended to confirm the barrel is fully sealed and pressure-ready. The float only operates when there is pressure inside the barrel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e S30 CO2 cylinder not included. For replacement seals, see the \u003ca href=\"\/products\/valve-cap-seal-set-for-pressure-barrels\"\u003eValve \u0026amp; Cap Seal Set\u003c\/a\u003e. For a bottom tap version, see the \u003ca href=\"\/products\/king-keg-barrel-bottom-tap-s30-valve\"\u003eKing Keg Bottom Tap\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 25 litres\u003c\/li\u003e\n\u003cli\u003eTap position: top tap with beer float\u003c\/li\u003e\n\u003cli\u003eFloat: draws from near the surface for clearer beer\u003c\/li\u003e\n\u003cli\u003eCap size: 4\"\u003c\/li\u003e\n\u003cli\u003eValve: brass S30 dual valve (gas inlet and pressure relief)\u003c\/li\u003e\n\u003cli\u003eCO2 source: S30 cylinder (SodaStream compatible with adapter)\u003c\/li\u003e\n\u003cli\u003eDiameter: approx. 36cm\u003c\/li\u003e\n\u003cli\u003eHeight: approx. 48cm\u003c\/li\u003e\n\u003cli\u003eIncludes: barrel, cap with S30 valve, beer float, handles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118607191,"sku":"2793","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/KK_Top_Tap.jpg?v=1778769572"},{"product_id":"king-keg-barrel-bottom-tap-s30-valve","title":"King Keg Bottom Tap - S30 Valve - Pressure Barrel","description":"\u003ch2\u003eKing Keg Bottom Tap — 25 Litre Pressure Barrel with S30 Valve Cap\u003c\/h2\u003e\n\u003cp\u003eThe King Keg Bottom Tap is a 25-litre homebrew pressure barrel with a bottom-mounted tap for dispensing beer or cider directly from the barrel. The 4\" cap is fitted with a brass S30 dual valve (gas inlet and pressure relief) for use with an S30 CO2 cylinder. The wider neck makes cleaning straightforward between batches. Handles are included for easy lifting and moving.\u003c\/p\u003e\n\u003cp\u003eIf S30 refills are not readily available locally, the \u003ca href=\"\/products\/sodastream-adapter-s30\"\u003eSodaStream to S30 Valve Adapter\u003c\/a\u003e allows use of standard SodaStream CO2 cylinders. For an upgraded dispensing experience, the \u003ca href=\"\/products\/barrel-tap-sparkler-style\"\u003eSparkler Tap\u003c\/a\u003e is a compatible replacement tap with adjustable head control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Ensure the tap is fitted correctly before filling. Testing with water and CO2 before use is strongly recommended to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e S30 CO2 cylinder not included. For replacement seals, see the \u003ca href=\"\/products\/valve-cap-seal-set-for-pressure-barrels\"\u003eValve \u0026amp; Cap Seal Set\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 25 litres\u003c\/li\u003e\n\u003cli\u003eTap position: bottom tap\u003c\/li\u003e\n\u003cli\u003eCap size: 4\"\u003c\/li\u003e\n\u003cli\u003eValve: brass S30 dual valve (gas inlet and pressure relief)\u003c\/li\u003e\n\u003cli\u003eCO2 source: S30 cylinder (SodaStream compatible with adapter)\u003c\/li\u003e\n\u003cli\u003eDiameter: approx. 36cm\u003c\/li\u003e\n\u003cli\u003eHeight: approx. 48cm\u003c\/li\u003e\n\u003cli\u003eIncludes: barrel, cap with S30 valve, handles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118639959,"sku":"2794","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/KK_bottom_Tap.jpg?v=1778769660"},{"product_id":"23-litre-pressure-barrel-with-s30-valve-cap","title":"23 Litre Pressure Barrel with S30 Valve Cap","description":"\u003ch2\u003e23 Litre Pressure Barrel with S30 Valve Cap\u003c\/h2\u003e\u003cp\u003eStore and serve your homebrew beer or cider on tap with this essential 23 litre pressure barrel. With a capacity of 5½ gallons, it holds up to 5 gallons of finished brew under controlled pressure — ready to dispense whenever you want a pint.\u003c\/p\u003e\u003ch3\u003eCO₂ Compatibility\u003c\/h3\u003e\u003cp\u003eThe cap is fitted with a brass S30 valve, compatible with:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/brewgas-s30-l30-co2-gas-cylinder-new\"\u003eBrewgas S30\/L30 CO₂ Gas Cylinder\u003c\/a\u003e (new or refill)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ePin Valve with 8g Bulb Holder\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds controlled pressure for consistent dispensing\u003c\/li\u003e\n\u003cli\u003e2\" diameter neck — clean with sterilant solution (no bottle-by-bottle washing)\u003c\/li\u003e\n\u003cli\u003eTap included — tighten before first use\u003c\/li\u003e\n\u003cli\u003eFar less cleaning than bottling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore First Use\u003c\/h3\u003e\u003cp\u003eEnsure the tap is fitted correctly before filling. We recommend testing with water and CO₂ first to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118705495,"sku":"2562","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/23l_barrel_s3.jpg?v=1777558660"},{"product_id":"23-litre-pressure-barrel-with-relief-valve-cap","title":"23 Litre Pressure Barrel with Relief Valve Cap","description":"\u003ch2\u003e23 Litre Pressure Barrel with Relief Valve Cap\u003c\/h2\u003e\u003cp\u003eA great entry-level barrel for storing and serving your homebrew beer or cider. With a capacity of 5½ gallons, it holds up to 5 gallons of finished brew and dispenses under the natural CO₂ pressure produced by the beverage itself.\u003c\/p\u003e\u003ch3\u003eHow It Works\u003c\/h3\u003e\u003cp\u003eThe screw cap has a built-in pressure relief valve that holds the natural carbonation from your brew — no CO₂ cylinder required to get started. Once the natural pressure drops, auxiliary CO₂ will need to be added to maintain dispense. If you'd prefer a barrel with CO₂ injection from the start, see our alternatives:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/23-litre-pressure-barrel-with-s30-valve-cap\"\u003e23 Litre Pressure Barrel with S30 Valve Cap\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/23-litre-pressure-barrel-with-pin-valve-cap\"\u003e23 Litre Pressure Barrel with Pin Valve Cap\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt-in pressure relief valve — no separate CO₂ equipment needed initially\u003c\/li\u003e\n\u003cli\u003e2\" diameter neck — clean with sterilant solution\u003c\/li\u003e\n\u003cli\u003eTap included — tighten before first use\u003c\/li\u003e\n\u003cli\u003eFar less cleaning than bottling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore First Use\u003c\/h3\u003e\u003cp\u003eEnsure the tap is fitted correctly before filling. We recommend testing with water and CO₂ first to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118738263,"sku":"2795","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/23l_barrel_solid.jpg?v=1777558995"},{"product_id":"10-litre-pressure-barrel-with-relief-valve-cap","title":"10 Litre Pressure Barrel with Relief Valve Cap","description":"\u003ch2\u003e10 Litre Pressure Barrel with Relief Valve Cap\u003c\/h2\u003e\u003cp\u003eThe compact alternative to a full 23L barrel. At 10 litres (up to 2 gallons), this pressure barrel is ideal for small batches, experimental brews, or splitting a standard brew between barrel and bottles. Small enough to fit in a fridge for serving cold.\u003c\/p\u003e\u003ch3\u003eHow It Works\u003c\/h3\u003e\u003cp\u003eThe screw cap has a built-in pressure relief valve that holds the natural CO₂ carbonation from your brew — no separate gas cylinder needed. Clean the barrel using sterilant solution via the 2\" diameter neck.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacity: 10 litres (approx. 2 gallons)\u003c\/li\u003e\n\u003cli\u003eDimensions: approx. 34cm height x 24cm diameter — fridge-friendly\u003c\/li\u003e\n\u003cli\u003eBuilt-in pressure relief valve — no CO₂ cylinder required\u003c\/li\u003e\n\u003cli\u003e2\" neck — clean with sterilant solution\u003c\/li\u003e\n\u003cli\u003eTap included — tighten before first use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore First Use\u003c\/h3\u003e\u003cp\u003eEnsure the tap is fitted correctly before filling. We recommend testing with water and CO₂ first to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e\u003cp\u003eNeed a larger barrel? See our \u003ca href=\"\/products\/23-litre-pressure-barrel-with-relief-valve-cap\"\u003e23 Litre Pressure Barrel with Relief Valve Cap\u003c\/a\u003e.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118836567,"sku":"2800","price":32.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/10l_pressure_barrel.jpg?v=1777562821"},{"product_id":"king-keg-barrel-top-tap-pin-valve","title":"King Keg Top Tap - Pin Valve - Pressure Barrel","description":"\u003ch2\u003eKing Keg Top Tap — 25 Litre Pressure Barrel with Pin Valve Cap\u003c\/h2\u003e\n\u003cp\u003eThe King Keg Top Tap is a 25-litre homebrew pressure barrel with a top-mounted tap and a beer float that draws from near the surface of the liquid, delivering clearer beer to the glass by avoiding sediment settled at the bottom. The 4\" cap is fitted with a brass pin valve for use with standard 8-gram CO2 bulbs. Built from food-grade plastic with a wider neck for easy cleaning between batches. Handles are included for easy lifting and moving.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ePin Valve Bulb Holder\u003c\/a\u003e is required to pierce the 8g CO2 bulbs and inject gas into the barrel — this is not included. For an upgraded dispensing experience, the \u003ca href=\"\/products\/barrel-tap-sparkler-style\"\u003eSparkler Tap\u003c\/a\u003e is a compatible replacement tap with adjustable head control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Ensure the tap is fitted correctly before filling. Testing with water and CO2 before use is strongly recommended to confirm the barrel is fully sealed and pressure-ready. The float only operates when there is pressure inside the barrel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 8g CO2 bulbs and bulb holder not included. For replacement seals, see the \u003ca href=\"\/products\/valve-cap-seal-set-for-pressure-barrels\"\u003eValve \u0026amp; Cap Seal Set\u003c\/a\u003e. For the S30 valve version, see the \u003ca href=\"\/products\/king-keg-barrel-top-tap-s30-valve\"\u003eKing Keg Top Tap with S30 Valve\u003c\/a\u003e. For the bottom tap version, see the \u003ca href=\"\/products\/king-keg-barrel-bottom-tap-pin-valve\"\u003eKing Keg Bottom Tap with Pin Valve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 25 litres (approx. 5 gallons)\u003c\/li\u003e\n\u003cli\u003eTap position: top tap with beer float\u003c\/li\u003e\n\u003cli\u003eFloat: draws from near the surface for clearer beer\u003c\/li\u003e\n\u003cli\u003eCap size: 4\"\u003c\/li\u003e\n\u003cli\u003eValve: brass pin valve\u003c\/li\u003e\n\u003cli\u003eCO2 source: standard 8g CO2 bulbs (bulb holder required separately)\u003c\/li\u003e\n\u003cli\u003eMaterial: food-grade plastic\u003c\/li\u003e\n\u003cli\u003eDiameter: approx. 36cm\u003c\/li\u003e\n\u003cli\u003eHeight: approx. 48cm\u003c\/li\u003e\n\u003cli\u003eIncludes: barrel, cap with pin valve, beer float, handles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118902103,"sku":"4211","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/KK_Top_Tap.jpg?v=1778769572"},{"product_id":"king-keg-barrel-bottom-tap-pin-valve","title":"King Keg Bottom Tap - Pin Valve - Pressure Barrel","description":"\u003ch2\u003eKing Keg Bottom Tap — 25 Litre Pressure Barrel with Pin Valve Cap\u003c\/h2\u003e\n\u003cp\u003eThe King Keg Bottom Tap is a 25-litre homebrew pressure barrel with a bottom-mounted tap for dispensing beer or cider directly from the barrel. The 4\" cap is fitted with a brass pin valve for use with standard 8-gram CO2 bulbs. The wider neck makes cleaning straightforward between batches. Handles are included for easy lifting and moving.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ePin Valve Bulb Holder\u003c\/a\u003e is required to pierce the 8g CO2 bulbs and inject gas into the barrel — this is not included. For an upgraded dispensing experience, the \u003ca href=\"\/products\/barrel-tap-sparkler-style\"\u003eSparkler Tap\u003c\/a\u003e is a compatible replacement tap with adjustable head control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Ensure the tap is fitted correctly before filling. Testing with water and CO2 before use is strongly recommended to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e 8g CO2 bulbs and bulb holder not included. For replacement seals, see the \u003ca href=\"\/products\/valve-cap-seal-set-for-pressure-barrels\"\u003eValve \u0026amp; Cap Seal Set\u003c\/a\u003e. For the S30 valve version, see the \u003ca href=\"\/products\/king-keg-barrel-bottom-tap-s30-valve\"\u003eKing Keg Bottom Tap with S30 Valve\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 25 litres\u003c\/li\u003e\n\u003cli\u003eTap position: bottom tap\u003c\/li\u003e\n\u003cli\u003eCap size: 4\"\u003c\/li\u003e\n\u003cli\u003eValve: brass pin valve\u003c\/li\u003e\n\u003cli\u003eCO2 source: standard 8g CO2 bulbs (bulb holder required separately)\u003c\/li\u003e\n\u003cli\u003eDiameter: approx. 36cm\u003c\/li\u003e\n\u003cli\u003eHeight: approx. 48cm\u003c\/li\u003e\n\u003cli\u003eIncludes: barrel, cap with pin valve, handles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626118934871,"sku":"3921","price":79.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/KK_bottom_Tap.jpg?v=1778769660"},{"product_id":"23-litre-pressure-barrel-with-pin-valve-cap","title":"23 Litre Pressure Barrel with Pin Valve Cap","description":"\u003ch2\u003e23 Litre Pressure Barrel with Pin Valve Cap\u003c\/h2\u003e\u003cp\u003eStore and serve your homebrew beer or cider on tap with this 23 litre pressure barrel. With a capacity of 5½ gallons, it holds up to 5 gallons of finished brew under controlled pressure — ready to dispense whenever you want a pint.\u003c\/p\u003e\u003ch3\u003eCO₂ Compatibility\u003c\/h3\u003e\u003cp\u003eThis barrel uses a pin valve cap. The pin design means it is \u003cstrong\u003eonly compatible with 8g CO₂ bulbs\u003c\/strong\u003e — it cannot be used with S30, S20, or any other gas injection cylinder.\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ePin Valve with 8g Bulb Holder\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHolds controlled pressure for consistent dispensing\u003c\/li\u003e\n\u003cli\u003e2\" diameter neck — clean with sterilant solution (no bottle-by-bottle washing)\u003c\/li\u003e\n\u003cli\u003eCarcass colour may vary (white or brown)\u003c\/li\u003e\n\u003cli\u003eTap included — tighten before first use\u003c\/li\u003e\n\u003cli\u003eFar less cleaning than bottling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore First Use\u003c\/h3\u003e\u003cp\u003eEnsure the tap is fitted correctly before filling. We recommend testing with water and CO₂ first to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119000407,"sku":"3996","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/23l_barrel_s3.jpg?v=1777558660"},{"product_id":"25l-pressure-barrel-with-4-cap","title":"25L Pressure Barrel with 4” Pin Cap","description":"\u003ch2\u003e25L Pressure Barrel and 4\" Pin Cap\u003c\/h2\u003e\n\u003cp\u003eElevate your home brewing experience with our 25L Pressure Barrel, uniquely designed with a 4” cap for unparalleled ease of cleaning.\u003c\/p\u003e\n\u003cp\u003eUnlike other models, this pressure barrel ensures a hassle-free maintenance process, making your brewing journey more enjoyable.\u003c\/p\u003e\n\u003cp\u003eCrafted for efficiency and convenience, this barrel comes equipped with integrated handles, allowing for effortless lifting and transportation.\u003c\/p\u003e\n\u003cp\u003eIt's not just a container; it's a brewer's trusted companion, designed to make every step of the process smoother.\u003c\/p\u003e\n\u003cp\u003eThe barrel is complemented by a CO2 injector cap (pin valve) and a pressure relief valve, ensuring your brew remains at the perfect pressure for optimum taste and carbonation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note, 8g CO2 bulbs and holder are required for dispensing and are available separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnsure the tap is fitted correctly before pouring your homebrew into the barrel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe advise testing with water and CO2 before use to ensure the barrel is fully sealed and pressure-ready. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119229783,"sku":"18","price":54.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/5417.jpg?v=1769254028"},{"product_id":"2-o-ring-for-pressure-barrel-cap","title":"2\" O Ring for Pressure Barrel Cap","description":"\u003ch2\u003e2\" O-Ring for Pressure Barrel Cap\u003c\/h2\u003e\u003cp\u003eA replacement flat-section white O-ring washer for 2-inch homebrew pressure barrel caps. If your barrel cap is no longer sealing properly — losing pressure or leaking around the cap — a perished or deformed cap washer is the most likely cause, and this is the straightforward fix.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: 2-inch pressure barrel caps with a flat-section white washer\u003c\/li\u003e\n\u003cli\u003eCompatible caps: \u003ca href=\"\/products\/2-barrel-cap-with-s30-valve\"\u003e2\" Cap with S30 Valve\u003c\/a\u003e, \u003ca href=\"\/products\/2-barrel-cap-with-pin-valve\"\u003e2\" Cap with Pin Valve\u003c\/a\u003e, \u003ca href=\"\/products\/2-barrel-cap-with-hole\"\u003e2\" Cap with Hole\u003c\/a\u003e, \u003ca href=\"\/products\/2-barrel-cap-with-vented\"\u003e2\" Cap with Vented Valve\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119328087,"sku":"2559","price":1.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/barrel_washer.jpg?v=1777980104"},{"product_id":"rubber-inlet-seal","title":"Valve Inlet Rubber","description":"\u003ch2\u003eValve Inlet Rubber — Replacement Inlet Seal for King Keg \u0026amp; 23L Pressure Barrels\u003c\/h2\u003e\n\u003cp\u003eA replacement rubber inlet seal for the combined gas inlet and pressure relief valve fitted to King Keg and other standard 23-litre homebrew pressure barrels. The inlet seal sits on the end of the valve and ensures a gas-tight fit when connecting a CO2 bulb or injector — a common wear part that is worth keeping as a spare to avoid downtime between brews.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This seal fits the combined gas inlet\/pressure relief valve style. Check your barrel's valve type before ordering to confirm compatibility.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: inlet seal \/ inlet rubber\u003c\/li\u003e\n\u003cli\u003eFits: King Keg and standard 23L homebrew pressure barrels\u003c\/li\u003e\n\u003cli\u003ePosition: end of the combined gas inlet and pressure relief valve\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hambleton Bard","offers":[{"title":"Default Title","offer_id":52626119393623,"sku":"4227","price":0.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/Valve_Inlet.jpg?v=1778767032"},{"product_id":"valve-cap-seal-set-for-pressure-barrels","title":"Valve \u0026 Cap Seal Set for Pressure Barrels","description":"\u003ch2\u003eValve \u0026amp; Cap Seal Set for Pressure Barrels\u003c\/h2\u003e\n\u003cp\u003eA complete set of valve and cap seals covering both King Keg and standard 23-litre pressure barrels. Includes all the rubber seals, washers, and O-rings needed to service the valve and cap assembly — a practical kit to have on hand when seals wear or perish over time. Compatible with both S30 and pin valve setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is a seal and washer set only — valves and caps are not included. For individual seal replacements, see the \u003ca href=\"\/products\/rubber-inlet-seal\"\u003eValve Inlet Rubber\u003c\/a\u003e and \u003ca href=\"\/products\/rubber-pressure-relief-valve\"\u003eValve Pressure Relief Rubber\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRubber Inlet × 1\u003c\/li\u003e\n\u003cli\u003ePressure Relief Rubber × 1\u003c\/li\u003e\n\u003cli\u003eValve Sealing Washer × 1\u003c\/li\u003e\n\u003cli\u003eValve O-ring × 1\u003c\/li\u003e\n\u003cli\u003eBlack 4\" O-ring (fits King Keg cap barrels) × 1\u003c\/li\u003e\n\u003cli\u003eWhite 2\" Washer (fits standard pressure cap barrels) × 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Youngs","offers":[{"title":"Default Title","offer_id":52626119426391,"sku":"2822","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/spares_barrel.jpg?v=1778768661"},{"product_id":"2-barrel-cap-with-s30-valve","title":"2'' Barrel Cap with S30 Valve","description":"\u003ch2\u003e2\" Pressure Barrel Cap with S30 Valve\u003c\/h2\u003e\u003cp\u003eA replacement 2-inch plastic cap for homebrew pressure barrels, fitted with an S30 dual valve — combining a CO2 inlet valve and a pressure relief (safety) valve in one unit. Includes an O-ring for an airtight seal. Designed for use with the \u003ca href=\"\/products\/brewgas-s30-l30-co2-gas-cylinder-new\"\u003eBrewgas S30\/L30 CO2 cylinder\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFits both 11 litre and 23 litre pressure barrels. A \u003ca href=\"\/products\/soda-stream-to-s30-valve-adapter-stainless-steel\"\u003eSodaStream to S30 adapter\u003c\/a\u003e is also available separately, allowing you to use a SodaStream cylinder with this cap instead.\u003c\/p\u003e\u003cp\u003ePressure tolerance is approximately 5psi.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 2 inches\u003c\/li\u003e\n\u003cli\u003eFits: 11L and 23L pressure barrels\u003c\/li\u003e\n\u003cli\u003eValve: S30 dual valve (CO2 inlet + pressure relief)\u003c\/li\u003e\n\u003cli\u003eIncludes: O-ring\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5psi\u003c\/li\u003e\n\u003cli\u003eFor use with: \u003ca href=\"\/products\/brewgas-s30-l30-co2-gas-cylinder-new\"\u003eBrewgas S30\/L30 CO2 cylinder\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional accessory: \u003ca href=\"\/products\/soda-stream-to-s30-valve-adapter-stainless-steel\"\u003eSodaStream to S30 Adapter\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119459159,"sku":"644","price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/barrel_cap_valves30.jpg?v=1777979333"},{"product_id":"tap-washer-black","title":"Tap Washer for Barrels \u0026 Buckets","description":"\u003ch2\u003eBeer Barrel Tap Washer\u003c\/h2\u003e\n\u003cp\u003eA replacement tap washer makes the seal between the body of the barrel and either a lever or drum-style tap.\u003c\/p\u003e\n\u003cp\u003eThis universal tap seal will fit a variety of homebrewing equipment such as brewing barrels, fermentation buckets \u0026amp; fermenters.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119491927,"sku":"378","price":1.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/5069.jpg?v=1769254031"},{"product_id":"sodastream-adapter-s30","title":"Soda Stream to S30 Valve Adapter - Stainless Steel","description":"\u003ch2\u003eSodaStream to S30 Valve Adapter — Stainless Steel\u003c\/h2\u003e\n\u003cp\u003eA stainless steel adapter that screws onto an \u003ca href=\"\/products\/brass-s30-valve-fits-pressure-barrel-cap\"\u003eS30 valve\u003c\/a\u003e, allowing you to use standard SodaStream CO2 cylinders with your homebrew pressure barrel instead of S30 gas cartridges. A practical solution if S30 refills are not readily available locally — SodaStream cylinders are widely stocked in supermarkets and can be exchanged at many retail outlets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Compatible with S30 valve-equipped barrels, including the \u003ca href=\"\/products\/king-keg-top-tap-s30-valve-pressure-barrel\"\u003eKing Keg Top Tap\u003c\/a\u003e, \u003ca href=\"\/products\/king-keg-bottom-tap-s30-valve-pressure-barrel\"\u003eKing Keg Bottom Tap\u003c\/a\u003e, and \u003ca href=\"\/products\/2-barrel-cap-with-s30-valve\"\u003e2\" Barrel Cap with S30 Valve\u003c\/a\u003e. SodaStream cylinders are not included.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: stainless steel\u003c\/li\u003e\n\u003cli\u003eFits: S30 valve (screws directly onto the valve)\u003c\/li\u003e\n\u003cli\u003eEnables: use of SodaStream CO2 cylinders with S30-equipped pressure barrels\u003c\/li\u003e\n\u003cli\u003eSodaStream cylinder not included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hambleton Bard","offers":[{"title":"Default Title","offer_id":52626119524695,"sku":"446","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/sodastream_adapater.jpg?v=1778767329"},{"product_id":"barrel-valve-to-cap-sealing-washer","title":"Valve Sealing Washer","description":"\u003ch2\u003eBeer Barrel Washer\u003c\/h2\u003e\n\u003cp\u003eThis black sealing washer fits on the flange of many barrel valves and makes the seal between the valve and the barrel cap.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119622999,"sku":"4235","price":0.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/5070.jpg?v=1769254033"},{"product_id":"pin-valve-with-8g-bulb-holder","title":"Pin Valve with 8g Bulb Holder","description":"\u003ch2\u003ePin Valve with 8g CO2 Bulb Holder — Replacement Gas Inlet \u0026amp; Pressure Relief Valve\u003c\/h2\u003e\n\u003cp\u003eA brass combined gas inlet and pressure relief valve fitted with a pin for piercing standard 8-gram CO2 bulbs, complete with a red bulb holder. Used to carbonate and pressurise homebrew in a pressure barrel by injecting CO2 directly from a bulb. This valve must be fitted into a barrel cap that has been drilled to accept it — see the \u003ca href=\"\/products\/2-pressure-barrel-cap-with-hole\"\u003e2\" Pressure Barrel Cap with Hole\u003c\/a\u003e for a compatible pre-drilled cap.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This valve cannot be fitted to a standard 2\" barrel cap with a moulded-in pressure relief valve — a drilled cap is required. If your barrel already has a brass threaded S30-style valve fitted, this pin valve is not compatible — you would need a separate 8g bulb injector designed for S30 valves instead. Approximate pressure tolerance: 5 psi.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eValve type: combined gas inlet and pressure relief\u003c\/li\u003e\n\u003cli\u003eCO2 source: standard 8-gram CO2 bulbs\u003c\/li\u003e\n\u003cli\u003eValve body: brass\u003c\/li\u003e\n\u003cli\u003ePin: stainless steel\u003c\/li\u003e\n\u003cli\u003eIncludes: red 8g bulb holder\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5 psi\u003c\/li\u003e\n\u003cli\u003eRequires: drilled barrel cap for fitment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Youngs","offers":[{"title":"Default Title","offer_id":52626119852375,"sku":"3872","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/bulb_holder_s30.jpg?v=1778767517"},{"product_id":"rubber-pressure-relief-valve","title":"Valve Pressure Relief Rubber","description":"\u003ch2\u003eValve Pressure Relief Rubber — Replacement Seal for S30 \u0026amp; Pin Valves\u003c\/h2\u003e\n\u003cp\u003eA replacement rubber seal for the pressure relief section of both S30 and pin valves fitted to King Keg and standard 23-litre homebrew pressure barrels. The pressure relief seal sits around the neck of the valve and ensures the relief mechanism operates correctly, venting excess pressure safely. A common wear part that is worth keeping as a spare alongside the \u003ca href=\"\/products\/rubber-inlet-seal\"\u003eValve Inlet Rubber\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Fits both S30 and pin valve types. Sold individually.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: pressure relief valve seal\u003c\/li\u003e\n\u003cli\u003eFits: S30 valve and pin valve\u003c\/li\u003e\n\u003cli\u003eCompatible with: King Keg and standard 23L homebrew pressure barrels\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hambleton Bard","offers":[{"title":"Default Title","offer_id":52626119917911,"sku":"4226","price":0.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/Valve_Relief.jpg?v=1778768243"},{"product_id":"king-keg-4-barrel-cap-with-s30-valve","title":"King Keg 4\" Barrel Cap with S30 Valve","description":"\u003ch2\u003eKing Keg 4\" Barrel Cap with S30 Valve\u003c\/h2\u003e\n\u003cp\u003eA 4\" replacement barrel cap for King Keg pressure barrels, fitted with a brass S30 dual valve combining the gas inlet and pressure relief (safety) valve. Includes an O-ring seal. Compatible with both top tap and bottom tap King Keg barrels and designed for use with the S30 CO2 gas cylinder. If S30 refills are not readily available locally, the \u003ca href=\"\/products\/sodastream-adapter-s30\"\u003eSodaStream to S30 Valve Adapter\u003c\/a\u003e allows you to use standard SodaStream CO2 cylinders instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Pressure tolerance is approximately 5 psi. O-ring included. S30 CO2 cylinder not included.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCap size: 4\"\u003c\/li\u003e\n\u003cli\u003eValve type: S30 dual valve (gas inlet and pressure relief)\u003c\/li\u003e\n\u003cli\u003eValve material: brass\u003c\/li\u003e\n\u003cli\u003eIncludes: O-ring\u003c\/li\u003e\n\u003cli\u003eCO2 source: S30 cylinder (or SodaStream cylinder with adapter)\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5 psi\u003c\/li\u003e\n\u003cli\u003eCompatible with: King Keg top tap and bottom tap pressure barrels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119950679,"sku":"636","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/KK_Barrel_Cap.jpg?v=1778767730"},{"product_id":"brass-s30-valve","title":"Brass S30 Valve - Fits Pressure Barrel Cap","description":"\u003ch2\u003eBrass S30 Valve — Fits Pressure Barrel Cap\u003c\/h2\u003e\u003cp\u003eReplacement brass S30 valve for 2-inch and 4-inch homebrew pressure barrels and King Keg barrels. Used in conjunction with a \u003ca href=\"\/products\/brewgas-s30-l30-co2-gas-cylinder-new\"\u003eBrewgas L30\/S30 CO2 cylinder\u003c\/a\u003e and \u003ca href=\"\/products\/brewgas-l30-regulator-for-s30-valves\"\u003eL30 regulator\u003c\/a\u003e to inject CO2 into your barrel and maintain carbonation.\u003c\/p\u003e\u003cp\u003eA \u003ca href=\"\/products\/soda-stream-to-s30-valve-adapter-stainless-steel\"\u003eSodaStream to S30 adapter\u003c\/a\u003e is also available separately, allowing you to use SodaStream gas canisters with this valve.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this brass valve is not compatible with 8g or 16g CO2 bulbs. Pressure tolerance is approximately 5psi.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits: 2-inch and 4-inch pressure barrel caps, King Keg barrels\u003c\/li\u003e\n\u003cli\u003eFor use with: \u003ca href=\"\/products\/brewgas-s30-l30-co2-gas-cylinder-new\"\u003eBrewgas L30\/S30 CO2 cylinder\u003c\/a\u003e and \u003ca href=\"\/products\/brewgas-l30-regulator-for-s30-valves\"\u003eL30 regulator\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5psi\u003c\/li\u003e\n\u003cli\u003eNot compatible with: 8g or 16g CO2 bulbs\u003c\/li\u003e\n\u003cli\u003eOptional accessory: \u003ca href=\"\/products\/soda-stream-to-s30-valve-adapter-stainless-steel\"\u003eSodaStream to S30 Adapter\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626119983447,"sku":"4238","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/s30_brass_valve.jpg?v=1777973828"},{"product_id":"king-keg-4-barrel-cap-with-pin-valve","title":"King Keg 4\" Barrel Cap with Pin Valve","description":"\u003ch2\u003eKing Keg 4\" Barrel Cap with Pin Valve\u003c\/h2\u003e\n\u003cp\u003eA 4\" replacement barrel cap for King Keg pressure barrels, fitted with a pin dual valve combining the gas inlet and pressure relief (safety) valve. Includes an O-ring seal. Compatible with both top tap and bottom tap King Keg barrels and designed for use with standard 8g CO2 or nitrogen bulbs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e A bulb holder is required to pierce the CO2 bulbs — this is not included with the cap. See the \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ePin Valve with 8g Bulb Holder\u003c\/a\u003e for a compatible holder. Pressure tolerance is approximately 5 psi. O-ring included. CO2 bulbs not included.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCap size: 4\"\u003c\/li\u003e\n\u003cli\u003eValve type: pin dual valve (gas inlet and pressure relief)\u003c\/li\u003e\n\u003cli\u003eCap material: plastic\u003c\/li\u003e\n\u003cli\u003eIncludes: O-ring\u003c\/li\u003e\n\u003cli\u003eCO2 source: standard 8g CO2 or nitrogen bulbs (bulb holder required separately)\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5 psi\u003c\/li\u003e\n\u003cli\u003eCompatible with: King Keg top tap and bottom tap pressure barrels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626120016215,"sku":"4236","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/KK_Barrel_Cap.jpg?v=1778767730"},{"product_id":"brass-pin-valve","title":"Brass Pin Valve for Pressure Barrels","description":"\u003ch2\u003eBrass Pin Valve for Pressure Barrels\u003c\/h2\u003e\u003cp\u003eA replacement brass barrel valve fitted with a bulb-piercing pin insert, allowing it to be used with a compatible \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003e8g CO2 bulb holder\u003c\/a\u003e and \u003ca href=\"\/products\/co2-gas-bulbs-8g-pack-of-10\"\u003e8g CO2 bulbs\u003c\/a\u003e to inject CO2 into your homebrew pressure barrel.\u003c\/p\u003e\u003cp\u003eIf you're looking for a valve that works with a refillable L30\/S30 cylinder instead, see the \u003ca href=\"\/products\/brass-s30-valve-fits-pressure-barrel-cap\"\u003eBrass S30 Valve\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003ePressure tolerance is approximately 5psi.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType: brass pin valve with bulb-piercing pin insert\u003c\/li\u003e\n\u003cli\u003eFor use with: \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003e8g CO2 bulb holder\u003c\/a\u003e and \u003ca href=\"\/products\/co2-gas-bulbs-8g-pack-of-10\"\u003e8g CO2 bulbs\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5psi\u003c\/li\u003e\n\u003cli\u003ePrefer a refillable cylinder? See the \u003ca href=\"\/products\/brass-s30-valve-fits-pressure-barrel-cap\"\u003eBrass S30 Valve\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626120048983,"sku":"342","price":14.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/s30_brass_valve_2f6790ee-e7db-42f1-8d96-96f1459898d3.jpg?v=1777974001"},{"product_id":"2-barrel-cap-with-hole","title":"2'' Pressure Barrel Cap with Hole","description":"\u003ch2\u003e2\" Pressure Barrel Cap with Hole\u003c\/h2\u003e\u003cp\u003eA robust replacement 2-inch cap for homebrew pressure barrels. Pre-drilled to accept either an \u003ca href=\"\/products\/brass-s30-valve-fits-pressure-barrel-cap\"\u003eS30 valve\u003c\/a\u003e (for use with a refillable L30\/S30 CO2 cylinder) or a \u003ca href=\"\/products\/brass-pin-valve-for-pressure-barrels\"\u003epin valve\u003c\/a\u003e (for use with 8g CO2 bulbs).\u003c\/p\u003e\u003cp\u003eFits both 11 litre and 23 litre pressure barrels.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 2 inches\u003c\/li\u003e\n\u003cli\u003eFits: 11L and 23L pressure barrels\u003c\/li\u003e\n\u003cli\u003ePre-drilled to accept: \u003ca href=\"\/products\/brass-s30-valve-fits-pressure-barrel-cap\"\u003eS30 valve\u003c\/a\u003e or \u003ca href=\"\/products\/brass-pin-valve-for-pressure-barrels\"\u003epin valve\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eValves sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626120114519,"sku":"638","price":3.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/barrel_cap_with_hole_2.jpg?v=1777977098"},{"product_id":"2-barrel-cap-with-pin-valve","title":"2\" Pressure Barrel Cap with Pin Valve","description":"\u003ch2\u003e2\" Pressure Barrel Cap with Pin Valve\u003c\/h2\u003e\u003cp\u003eA replacement 2-inch plastic cap for homebrew pressure barrels, fitted with a pin dual valve — combining a CO2 inlet valve and a pressure relief (safety) valve in one unit. Includes an O-ring for an airtight seal. Designed for use with \u003ca href=\"\/products\/co2-gas-bulbs-8g-pack-of-10\"\u003e8g CO2 bulbs\u003c\/a\u003e or nitrogen bulbs.\u003c\/p\u003e\u003cp\u003eTo inject gas you will also need a \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ebulb holder\u003c\/a\u003e to pierce the bulb and connect it to the pin valve. Fits both 11 litre and 23 litre pressure barrels.\u003c\/p\u003e\u003cp\u003ePressure tolerance is approximately 5psi.\u003c\/p\u003e\u003cp\u003eIf you prefer to use a refillable S30\/L30 CO2 cylinder instead of bulbs, see the \u003ca href=\"\/products\/2-barrel-cap-with-s30-valve\"\u003e2\" Barrel Cap with S30 Valve\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 2 inches\u003c\/li\u003e\n\u003cli\u003eFits: 11L and 23L pressure barrels\u003c\/li\u003e\n\u003cli\u003eValve: pin dual valve (CO2 inlet + pressure relief)\u003c\/li\u003e\n\u003cli\u003eIncludes: O-ring\u003c\/li\u003e\n\u003cli\u003ePressure tolerance: approx. 5psi\u003c\/li\u003e\n\u003cli\u003eFor use with: \u003ca href=\"\/products\/co2-gas-bulbs-8g-pack-of-10\"\u003e8g CO2 bulbs\u003c\/a\u003e + \u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ebulb holder\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrefer a refillable cylinder? See the \u003ca href=\"\/products\/2-barrel-cap-with-s30-valve\"\u003e2\" Barrel Cap with S30 Valve\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626120245591,"sku":"4498","price":19.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/barrel_cap_valve.jpg?v=1777979597"},{"product_id":"barrel-tap-sparkler-style","title":"Sparkler Tap for Pressure Barrel","description":"\u003ch2\u003eSparkler Tap for Pressure Barrel\u003c\/h2\u003e\n\u003cp\u003eA vertical lever flip-top tap with an adjustable sparkler nozzle, designed as an upgrade over the standard King Keg barrel tap. The lever action can be pressed down or pulled up and locked open for hands-free pouring, while the sparkler nozzle lets you dial in exactly the right level of head on your beer. Particularly effective for tight-headed Yorkshire Bitters and traditional cask-style ales where head control matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Check thread compatibility with your barrel tap fitting before ordering. Compatible with King Keg and standard 23L pressure barrels.\u003c\/p\u003e\n\u003ch3\u003eAt a Glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAction: vertical lever flip-top (press down or pull up, locks open)\u003c\/li\u003e\n\u003cli\u003eNozzle: adjustable sparkler for head control\u003c\/li\u003e\n\u003cli\u003eBest for: Yorkshire Bitters, traditional ales, and any beer where head matters\u003c\/li\u003e\n\u003cli\u003eCompatible with: King Keg and standard 23L pressure barrels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"hamstead","offers":[{"title":"Default Title","offer_id":52626120278359,"sku":"3353","price":19.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/sparkler.jpg?v=1778768902"},{"product_id":"2-barrel-cap-with-vented","title":"2'' Pressure Barrel Cap with Vented Valve","description":"\u003ch2\u003e2\" Pressure Barrel Cap with Vented Valve\u003c\/h2\u003e\u003cp\u003eA robust replacement 2-inch cap for homebrew pressure barrels, fitted with a small rubber vent valve on the central lug. The vent valve lifts automatically to release any excess pressure build-up, helping to prevent over-pressurisation of your barrel.\u003c\/p\u003e\u003cp\u003eFits both 11 litre and 23 litre pressure barrels. If you need a cap with a hole for an S30 or pin valve instead, see the \u003ca href=\"\/products\/2-barrel-cap-with-hole\"\u003e2\" Barrel Cap with Hole\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAt a Glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSize: 2 inches\u003c\/li\u003e\n\u003cli\u003eFits: 11L and 23L pressure barrels\u003c\/li\u003e\n\u003cli\u003eVent valve: rubber, lifts to release excess pressure automatically\u003c\/li\u003e\n\u003cli\u003eNeed a CO2 inlet? See the \u003ca href=\"\/products\/2-barrel-cap-with-hole\"\u003e2\" Barrel Cap with Hole\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626120474967,"sku":"4497","price":4.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/barrel_cap_vented.jpg?v=1777978935"},{"product_id":"s30-valve-internal-o-ring","title":"S30 Valve Internal O-Ring","description":"\u003cp\u003eThis small \u003cstrong\u003einternal O-ring\u003c\/strong\u003e sits just inside the top of your \u003cstrong\u003eS30 gas valve\u003c\/strong\u003e, where the neck of the CO? cylinder seats during injection.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52626517426519,"sku":"2030","price":0.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/5841.jpg?v=1769255609"},{"product_id":"23-litre-pressure-barrel-with-pin-valve-cap-8g-bulb-holder","title":"23 Litre Pressure Barrel with Pin Valve Cap \u0026 8g Bulb Holder","description":"\u003ch2\u003e23 Litre Pressure Barrel with Pin Valve Cap \u0026amp; 8g Bulb Holder\u003c\/h2\u003e\n\u003cp\u003eEverything you need to store and serve your homebrew beer or cider on tap. This bundle includes the 23 litre pressure barrel, a pin valve cap with combined inlet and pressure release valve, and a red plastic 8g CO₂ bulb holder — ready to go straight out of the box.\u003c\/p\u003e\n\u003ch3\u003eCO₂ Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe pin valve cap is \u003cstrong\u003eonly compatible with 8g CO₂ bulbs\u003c\/strong\u003e. The pin design makes it unsuitable for use with S30, S20, or any other gas injection cylinder.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/pin-valve-with-8g-bulb-holder\"\u003ePin Valve with 8g Bulb Holder\u003c\/a\u003e (spare or replacement)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e23 litre pressure barrel\u003c\/li\u003e\n\u003cli\u003ePin valve cap with combined inlet and pressure release valve\u003c\/li\u003e\n\u003cli\u003eRed plastic 8g CO₂ bulb holderhome brewing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHolds controlled pressure for consistent dispensing\u003c\/li\u003e\n\u003cli\u003e2\" diameter neck — clean with sterilant solution\u003c\/li\u003e\n\u003cli\u003eTap included — tighten before first use\u003c\/li\u003e\n\u003cli\u003eFar less cleaning than bottling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore First Use\u003c\/h3\u003e\n\u003cp\u003eEnsure the tap is fitted correctly before filling. We recommend testing with water and CO₂ first to confirm the barrel is fully sealed and pressure-ready.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":53604073931095,"sku":null,"price":53.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/23l_barrel_with_holder.jpg?v=1777562264"}],"url":"https:\/\/www.home-brew-hopshop.co.uk\/collections\/pressure-barrels-spares.oembed","provider":"The Hop Shop","version":"1.0","type":"link"}