Airstone for Wort Aerator

Airstone for Wort Aerator - 0.5 Micron

This superior-quality airstone is ideal for aerating wort to ensure a quick start to fermentation.

It is made from sintered stainless steel with 2.0 or 0.5 micron holes and has an 6mm barbed hose fitting.

The 2 micron is more commonly used for the aeration of your cooled wort to assist fermentation.

The 0.5 micron is more commonly used for the carbonation of the finished beer.

It's overall length is 4.7cm and the diameter is 1.3cm.

The best way to sterilise this would be to place it in boiling water for 15 minutes.

Any blockages may initially be treated by dropping the stone into methylated spirits.

It is recommended that the sintered part is not touched as the natural oil on hands can clog the very fine pores.

If intended to use with the Brewferm wort aerator, then take the tubing underneath to ensure a good fit with the tubing that is included with the pump.

All dimensions are approximate.

Brupaks
308

0
0/5 - 0 reviews

Only users who already bought the product can add review.