{"product_id":"duotight-8mm-liquid-ball-lock-disconnect","title":"Duotight 8mm (5\/16\") Liquid Ball Lock Disconnect","description":"\u003cp\u003eDuotight 8mm Liquid Keg Disconnect – 5\/16\" Ball Lock\u003c\/p\u003e\n\u003c!-- URL Slug: \/duotight-8mm-liquid-ball-lock-disconnect --\u003e\n\u003ch2\u003eDuotight 8mm (5\/16\") Liquid Ball Lock Disconnect – Kegging Hardware\u003c\/h2\u003e\n\u003cp\u003eIf you’re running EVA Barrier lines and you want your beer side to be a bit neater and less fiddly, this Duotight 8mm liquid ball lock disconnect does the job really well. It snaps onto the liquid post like a normal disconnect, but instead of a barb and clamp, you just push your 8mm line straight in. No heating tubing, no wrestling with hose clamps, and way less swearing when you decide you want to shorten or reroute a line later.\u003c\/p\u003e\n\u003cp\u003eThis one’s the \u003cstrong\u003eblack\/yellow liquid disconnect\u003c\/strong\u003e, so it’s for the beer side of your ball lock keg – perfect for serving beer, cider, soda, whatever you’re running through that post.\u003c\/p\u003e\n\u003ch3\u003eDuotight 8mm Liquid Ball Lock Disconnect – How It Works \u0026amp; What to Expect\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDuotight 8mm liquid ball lock disconnect\u003c\/strong\u003e has the Duotight push-fit built right into the top, so the fitting and disconnect are one compact unit. As long as your tubing is cut clean and square, you just push it in until it bottoms out and it locks in place. The seal is surprisingly solid – once it’s in, you can yank on the line and it’s not going anywhere under normal keg pressures.\u003c\/p\u003e\n\u003cp\u003eCompared to the old-school plastic disconnects, this one’s smaller and feels more refined. The internal design is set up for good flow, so you’re not choking the beer as it leaves the keg, and the overmoulded poppet means you can still pop it on and off even at higher pressures without blowing out tiny o-rings. It’s the kind of bit of gear you don’t think much aboutÉ until you go back to barbs and clamps and instantly miss it.\u003c\/p\u003e\n\u003ch3\u003eWhat You Need to Use It\u003c\/h3\u003e\n\u003cp\u003eNothing fancy, just normal kegging gear:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBall lock keg with a liquid post (black post)\u003c\/li\u003e\n\u003cli\u003e8mm (5\/16\") OD EVA Barrier or similar rigid beer line\u003c\/li\u003e\n\u003cli\u003eTap or beer gun on the other end of your line\u003c\/li\u003e\n\u003cli\u003eCO? tank and regulator to push the beer out of the keg\u003c\/li\u003e\n\u003cli\u003eSoapy water or sanitizer spray to check for leaks after setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type:\u003c\/strong\u003e Ball lock (liquid, black\/yellow)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing Size:\u003c\/strong\u003e 8mm (5\/16\") OD line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest With:\u003c\/strong\u003e 4 mm or 5 mm ID x 8 mm OD EVA Barrier-style tubing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Style:\u003c\/strong\u003e Integrated Duotight push-in (no extra threaded fittings needed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForm Factor:\u003c\/strong\u003e Very compact, ideal for tight keezers\/kegerators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoppet:\u003c\/strong\u003e Overmoulded design for reliable sealing even at higher pressures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisassembly:\u003c\/strong\u003e Tool-free cap for easy cleaning and pulling apart\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e Chemical-resistant engineering plastic body with stainless internals and EPDM seals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical Resistance:\u003c\/strong\u003e Handles common brewing cleaners and sanitisers (acid and caustic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Liquid side only – pair with the grey\/red version for gas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eA Brewer’s Tip\u003c\/h3\u003e\n\u003cp\u003eWhen you first push the line in, give it a firm, confident shove, then tug back lightly to make sure it’s properly seated. If you ever need to move or shorten the line, push the little collar down with one hand and pull the tubing out with the other. And seriously – spend a couple of bucks on a tubing cutter; clean, square cuts are the difference between “perfectly sealed” and “slow, mysterious drip in the bottom of the fridge.”\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this for beer or gas?\u003c\/strong\u003e\u003cbr\u003e This one’s for the \u003cem\u003eliquid\u003c\/em\u003e side (black\/yellow). Use it on the beer post. For gas, grab the matching grey\/red gas disconnect in the same size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tubing works best with it?\u003c\/strong\u003e\u003cbr\u003e It’s designed for 8mm OD rigid-style line, like 4 mm or 5 mm ID EVA Barrier. Soft, squishy vinyl tubing doesn’t lock in as securely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I take it apart to clean?\u003c\/strong\u003e\u003cbr\u003e Yep. The cap is designed to unscrew by hand so you can get inside, rinse out hop debris, and put it back together without tools.\u003c\/p\u003e","brand":"Brouwland","offers":[{"title":"Default Title","offer_id":52626517557591,"sku":"458","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/5974.jpg?v=1769255611","url":"https:\/\/www.home-brew-hopshop.co.uk\/products\/duotight-8mm-liquid-ball-lock-disconnect","provider":"The Hop Shop","version":"1.0","type":"link"}