{"product_id":"keg-king-chubby-apollo-30l-fermenter","title":"Chubby Apollo 30L – Pressure Fermenter","description":"\u003ch2\u003eKeg King Chubby Apollo 30L Pressure Fermenter\u003c\/h2\u003e\u003cp\u003eIf you've been homebrewing for a while, there's a good chance you've come across the original Chubby fermenter. It's been a solid go-to for pressure fermentation. The Chubby Apollo takes that same reliable design and improves it where it matters most — starting with a wider 115mm lid that actually lets you reach in and clean it properly.\u003c\/p\u003e\u003cp\u003eIt's still compact and lightweight, but now it's way easier to handle thanks to the moulded side handles. Whether you're fermenting under pressure or going the traditional gravity route with an airlock, this tank's up for the job. It's ideal for single 23–25L batches, and unlike some of the flimsier PET fermenters out there, this one's built tough.\u003c\/p\u003e\u003cp\u003eIf you're into pressure fermenting lagers at ale temps, or you like the idea of carbonating and serving right from your fermenter, the Apollo has you covered.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhat's the Chubby Apollo Like in Action?\u003c\/h2\u003e\u003cp\u003eFor real-world brewing, the Chubby Apollo hits that balance of simplicity and performance. It's easy to use, quick to clean, and holds pressure like a champ. The wide opening alone makes it worth the upgrade if you've fought with narrow-lid fermenters before.\u003c\/p\u003e\u003cp\u003ePressure fermentation helps you knock out cleaner beers faster, especially when you're working with limited temp control. Suppressed esters, faster timelines, and a beer that's nearly carbonated by the time you're done — what's not to like?\u003c\/p\u003e\u003cp\u003eAnd that big lid isn't just good for cleaning. It gives you room to dry hop, install a thermowell, or run a CIP ball without having to MacGyver anything through tight ports. You can monitor fermentation visually, swap out fittings easily, and even serve directly from the tank. It's just practical gear made for brewers who actually brew.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eWhat You'll Need to Use It\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCO₂ cylinder and regulator\u003c\/li\u003e\n\u003cli\u003eSpunding valve (or a 10–15 psi PRV — blue or purple)\u003c\/li\u003e\n\u003cli\u003eNon-caustic sanitiser (like ChemSan or VWP)\u003c\/li\u003e\n\u003cli\u003eGas and liquid ball lock disconnects\u003c\/li\u003e\n\u003cli\u003eFloating dip tube setup (already included)\u003c\/li\u003e\n\u003cli\u003eOptional: thermowell, cooling coil, CIP cleaning gear\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e115mm wide lid — finally, a fermenter you can clean without contorting\u003c\/li\u003e\n\u003cli\u003eBuilt-in carry handles — strong enough to lift even when full\u003c\/li\u003e\n\u003cli\u003eCrystal-clear PET — lets you keep an eye on fermentation progress\u003c\/li\u003e\n\u003cli\u003ePressure ferment, carbonate, and serve from the same vessel\u003c\/li\u003e\n\u003cli\u003eFloating dip tube setup pulls bright beer from the top\u003c\/li\u003e\n\u003cli\u003eCompatible with Keg King add-ons: Spundy, thermowell, cooling coil, CIP kits\u003c\/li\u003e\n\u003cli\u003eMade in Australia from BPA-free PET — not a cheap import\u003c\/li\u003e\n\u003cli\u003eIndividually pressure-tested to ensure reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eWhat's Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e30L Chubby Apollo PET tank\u003c\/li\u003e\n\u003cli\u003eApollo lid, neck ring, and silicone O-ring\u003c\/li\u003e\n\u003cli\u003eGas and liquid ball lock posts (304 stainless steel)\u003c\/li\u003e\n\u003cli\u003eUniversal poppet and spring (x2)\u003c\/li\u003e\n\u003cli\u003eShort stainless dip tubes with O-rings (x2)\u003c\/li\u003e\n\u003cli\u003eWhite 25 psi pressure relief valve (pre-installed)\u003c\/li\u003e\n\u003cli\u003ePRV housing and O-ring\u003c\/li\u003e\n\u003cli\u003eThermowell port cap (removable)\u003c\/li\u003e\n\u003cli\u003eSilicone dip tube with stainless float\u003c\/li\u003e\n\u003cli\u003eStainless steel beer filter\u003c\/li\u003e\n\u003cli\u003eStick-on thermometer\u003c\/li\u003e\n\u003cli\u003eVolume\/graduation sticker\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecs \u0026amp; Dimensions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 30L total (ideal for 23–25L batches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e BPA-free, food-grade PET\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 602mm (to top of posts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 300mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning access:\u003c\/strong\u003e wide 115mm opening\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003ePressure \u0026amp; Ports\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax pressure:\u003c\/strong\u003e 2.4 bar \/ 35 psi (tested to 5 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure relief valve:\u003c\/strong\u003e 25 psi white PRV installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall lock posts:\u003c\/strong\u003e 1 gas, 1 liquid (304 stainless)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLid ports (4 total):\u003c\/strong\u003e gas post, liquid post, dry-hop \/ PRV port, thermowell port (capped by default)\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eBrewer's Tip: Avoid Scratched Plastic — It's a Sneaky Infection Risk\u003c\/h2\u003e\u003cp\u003eOne mistake a lot of brewers make with PET fermenters: cleaning with the wrong stuff. Even a tiny scratch can harbour bacteria and wild yeast, and once it's in there, it's tough to get out. Stick to soft sponges, no steel wool, and definitely no abrasives. Always check your lid seals and ball lock fittings too — gunk loves to hide there.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eCan I use this without pressure?\u003c\/h3\u003e\u003cp\u003eAbsolutely. Just attach a standard airlock or blow-off tube and it works like a traditional gravity fermenter.\u003c\/p\u003e\u003ch3\u003eCan I serve straight from it?\u003c\/h3\u003e\u003cp\u003eYes. Cold crash it, carbonate inside the tank, and hook it up to a tap or picnic faucet. It's perfect for serving small batches straight from the fermenter.\u003c\/p\u003e\u003ch3\u003eWhat's the safe pressure limit?\u003c\/h3\u003e\u003cp\u003eIt's rated to 5 bar at the factory, but in day-to-day brewing, stick to 2.4 bar (35 psi) max for safe operation.\u003c\/p\u003e","brand":"Bevie","offers":[{"title":"Default Title","offer_id":52616124596567,"sku":"873","price":84.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/5495\/5607\/files\/chubby_apollo.jpg?v=1777986090","url":"https:\/\/www.home-brew-hopshop.co.uk\/products\/keg-king-chubby-apollo-30l-fermenter","provider":"The Hop Shop","version":"1.0","type":"link"}