Kegmaster Premium XL 3 Tap Kegerator

The Kegmaster Premium XL 3 Tap Kegerator is a 160-litre refrigerated draught beer dispenser for serving up to three kegs through independent stainless-steel UltraTap faucets. It provides a complete cooling, tapping and gas-distribution base for a permanent home bar or home-brew serving setup.

Three-Tap Home Kegerator

The preassembled three-tap font lets you keep several beers chilled and ready to pour at the same time. A speed-controlled font fan circulates cold air into the tower to help keep the beer lines and taps cool, while the reversible door and rear CO2-cylinder bracket provide flexibility when planning the installation.

Keg Capacity

The 160L cabinet can accommodate the following example configurations, subject to the exact dimensions and fittings of your kegs:

• 3 × 19L Cornelius kegs, with cabinet space for a fourth keg
• 2 × 20L PET kegs plus 1 × 19L Cornelius keg
• 3 × 20L stainless commercial kegs
• 1 × 50L stainless commercial keg

Always compare your keg dimensions, couplers and gas connections with the internal cabinet measurements before ordering.

Key Features

• Three stainless-steel UltraTap beer faucets
• Fastap push-in line fittings
• Preassembled three-tap font and gas line
• MKX gas regulator included
• Speed-controlled font cooling fan
• Reversible door and internal light
• Rear bracket for a CO2 cylinder
• Built-in rollers; optional castors can be fitted
• R600a refrigerant

What Is Included?

• Kegmaster Premium XL kegerator
• Preassembled three-tap font and gas line
• MKX regulator

Beer kegs, keg couplers or disconnects, and the CO2 cylinder are not stated as included. Select the correct connections for the keg system you intend to use. Browse our Cornelius Kegs & Spares and Kegging & Dispensing ranges for compatible serving equipment.

Specifications

• Cabinet volume: 160L
• External dimensions: 850mm H × 610mm W × 660mm D
• Internal dimensions: 725mm H × 512mm W × 405mm D
• Height: approximately 830mm without rollers or 890mm with optional castors
• Packaged dimensions: 880mm H × 660mm W × 690mm D
• Weight: 43kg
• Power supply: 220–240V, 50Hz
• Climate class: T
• Refrigerant: R600a, 40g
• Insulation: cyclopentane

Positioning and First Use

Measure the intended space before ordering and retain the ventilation clearances specified by the manufacturer. This is a refrigeration appliance and should not be tightly enclosed unless the installation instructions explicitly permit it.

After transport, keep the kegerator upright and allow it to stand for 24 hours before switching it on. Position and secure the CO2 cylinder safely, check all gas connections for leaks and balance the serving pressure before dispensing beer.

Delivery Information

• Mainland UK delivery only
• Shipped securely by pallet because of its size and weight
• Please ensure someone is available at the delivery address to receive the pallet
• Collection from our Plymouth shop may be available; call 01752 660382 before travelling

Frequently Asked Questions

Are beer kegs included?

No beer kegs are stated as included with this model. Choose kegs and the appropriate disconnects or couplers separately.

Is the CO2 cylinder included?

No. A rear cylinder bracket and MKX regulator are included, but the CO2 cylinder must be obtained separately.

Can it serve three different beers?

Yes. The three taps allow up to three connected beer lines to be served, provided suitable kegs, gas distribution and connectors are installed.

Will it fit under my counter?

Check the full appliance dimensions and required ventilation clearance before installation. Do not treat it as a built-in appliance unless the manufacturer's instructions confirm the planned arrangement is suitable.