80 Bottle Rinser

80 Bottle Rinser

A spring-loaded bottle rinser designed to sit on top of the 80 Bottle Drainer, forming a complete rinsing and draining station. Suitable for narrow-necked glass bottles fitted with corks, crown caps, or swing tops. Fill the bowl with sulphite solution, push the clean bottle down onto the pump, and the solution is forced up into the bottle to sanitise all internal surfaces. Place the bottle straight onto the drainer tree to drain — no rinsing off is required when using a no-rinse steriliser.

For a smaller setup, see the 45 Bottle Rinser, which pairs with the 45 Bottle Drainer. Potassium Metabisulfite is suitable for use as a sulphite sanitising solution.

Please note: Designed for narrow-necked glass bottles only. Not suitable for wide-neck or screw-top PET bottles. Sulphite solution not included.

How to Use

• Fill the rinser bowl with sulphite solution
• Push a clean bottle down firmly onto the spring-loaded pump
• The solution is pumped up into the bottle, sanitising all internal surfaces
• Place the bottle on the drainer tree to drain
• No rinsing required when using a no-rinse steriliser — bottles are ready in approximately 10 minutes

At a Glance

• Fits: 80 Bottle Drainer (sits on top of the tree)
• Action: spring-loaded pump
• Suitable for: narrow-necked glass bottles (cork, crown cap, swing top)
• Not suitable for: wide-neck or screw-top PET bottles
• Solution: sulphite or no-rinse steriliser (not included)