Stainless Steel Counter Pressure Bottle Filler

Counter Pressure Bottle filler

The manual counter-pressure bottle filler allows you to fill bottles from a carbonated keg with minimal foaming and CO2 loss.

This method of bottling prevents sediment in the bottle which you typically get from bottle conditioning.

Specification

• Full Stainless construction with a silicone bung to seal to the bottleneck.
• The filler has 7mm barbs on the inlets and release valve which suit beer lines with an internal diameter of 5 or 6 mm.
• The bung will suit bottles with an internal neck diameter between 14 - 20 mm.
• Bottles need to be at least 22 cm high.
• Connect your CO2 line from the regulator on one side and the beer line from the keg to the other side.
• A three-way valve at the top of the counter pressure filler: CO2 In / Beer In / Closed.

Cleaning

After use, we recommend running a peroxide-based cleaning product through the filler such as Chemipro Oxi and rinse out with water.

Before the next use rinse again with a phosphoric acid-based sanitiser such as Star San.

Lines, clamps, gas splitter and disconnects/coupler to suit the kegs are not included.