Weldless Bi-Metal Thermometer Probe - 3" Dial Face
With this bi-metal thermometer you can brew & obtain constant real time temperature readings.
It's weldless fitting can be easily fitted to a boiler, hot liquor tank or non insulated mash tun just by drilling a 12.5mm hole (1/2") and tightening up the washer & securing nut supplied.
Note: might also need plumbing PTFE tape (not supplied).
The 6mm diameter steel temperature probe has a length of 60mm.
If using in a mash tun, care will be needed not to knock it when stirring.
It also has suggested "ranges" on the dial.
3" Glass Lens
304 Stainless Steel Case
Large graduations
Display 0°C to 100°C Customised for brewing
Accuracy +/- 1%.
Recalibration Screw on the rear of the case
304 Stainless Steel Stem - 6mm diameter x 60mm length
1/2" or 12.5mm hole required
Stainless Steel Male Thread - 13mm long weldless fitting