Weldless Bi-Metal Thermometer Probe - 3" Dial Face

With this bi-metal thermometer you can brew & obtain constant real time temperature readings.

It's weldless fitting can be easily fitted to a boiler, hot liquor tank or non insulated mash tun just by drilling a 12.5mm hole (1/2") and tightening up the washer & securing nut supplied.

Note: might also need plumbing PTFE tape (not supplied).

The 6mm diameter steel temperature probe has a length of 60mm.

If using in a mash tun, care will be needed not to knock it when stirring.

It also has suggested "ranges" on the dial.

3" Glass Lens

304 Stainless Steel Case

Large graduations

Display 0°C to 100°C Customised for brewing

Accuracy +/- 1%.

Recalibration Screw on the rear of the case

304 Stainless Steel Stem - 6mm diameter x 60mm length

1/2" or 12.5mm hole required

Stainless Steel Male Thread - 13mm long weldless fitting